Tuesday, April 29, 2014

Houdini cattle

Sunday evening something didn't look right in the corral as I passed by.  A closer look revealed half of the cattle were gone. Huh?!  Then I saw the missing cattle inside the loading corral.

What?!

How did they get in there?  All the corral panels and fences were intact.  All gates were closed.  How?

A closer look and I found that the loading corral gate was not chained.  The gate was closed but the chain that ran through the eye bolt and back to the gate was hanging loose from the gate.  The cattle somehow unchained the gate, got into the loading corral, then closed the gate behind them.   Kind of like in the movies and TV shows were the person gets untied or out of handcuffs, the bad guys return so the person pretends to be still handcuffed or tied so as not to attract suspicion.  Pretty clever cattle.

I herded the cattle out.  When doing so I noticed the bull calf was not among them.  He had slipped out when the other cattle got in and he was at the metal hay feeder eating hay.  The cattle who gotten into the loading corral had been eating the hay bale in the loading corral.

For each of them I guess the hay over there is better than the hay over here.

*sigh*

I herded the bull calf back into the loading corral.  He was harder to herd than the other cattle as he didn't want to go in and be alone again.

I think what happened with the gate is that I hooked the chain back to the gate but I forgot the extra step of slipping the end of the chain through the hole in the gate after hooking it.  The cattle lifted the chain until it unhooked from the gate. Then they pushed on the gate until the chain slipped all of the way out of the eye bolt. Who says cattle are dumb?

In the two photos below this is a different gate without an eye bolt in the post but the gate and chain are the same concept.  Photo 1 is how I think I had the other gate.  Photo 2 is how I should have fixed the gate.




If Momma doesn't have her calf soon I think her udder will pop.  Man, it is swollen.





Saturday, April 26, 2014

Another tree stump dig

Last Fall I started digging around another tree stump.  The ground was dry and hard and the digging slow so I didn't finish.  This Spring the ground is moist and soft and the digging is easier.  I finished digging around this tree stump for later burning. 

The stump is much larger than the tiny bit that was above ground, and larger than it looks like in the photos.  There is no tap root.  Instead the stump is shaped like a spider with large roots that go out sideways.  I took an axe to some smaller side roots so I could have easier access to digging under the root.

We'll have a massive bonfire later this year to burn up the stump.




Friday, April 25, 2014

Harrow hayfield and cattle mischief

Now that the cattle are back into the corral I drug the harrow around the hayfield to break up the manure.  I finished Friday evening.  It rained after I started so I had to use the pickup's four wheel drive as the two wheels started to slip and spin on the wet grass and mud.  By the end I was pulling around a wet and muddy mess.  But I am now done dragging the harrow around the pastures and hayfield.



I didn't find any dirt mounds in the hayfield from pocket gophers.  I finished trapping the pocket gophers from the south pasture.  I got five total.


Friday evening I had to separate Beulah's young calf from Beulah.   The calf may be in heat again.  Beulah was hanging around the calf and trying to mount her.   The calf would collapse under Beulah's weight.  The calf is around 400 lbs and Beulah is around 1600 lbs.  I was afraid the calf would get hurt so I put her in another part of the corral for a number of hours.  Today Beulah is leaving the calf alone.

Beulah and her calf

I also saw the cattle broke part of the loading corral.  The panels were nailed on the inside of the loading corral as that is where the pressure would be located by cattle trying to get out.  I didn't plan on the cattle pushing the panels from the outside to get at the grass on the inside.  They popped off one panel.  I had to put it back on.  I added more and longer nails this time.



Thursday, April 24, 2014

Back into the corral

In the hayfield, last year's grass was pretty much eaten down and the new grass was greening up and starting to grow.  Time for the cattle to return to the corral in order to let the green grass get a head start on the growing season.

Wednesday morning the herd was laying in the corral taking a siesta.  By the time I got out there four cattle had wandered out of the corral back into the hayfield.

I moved the bull calf into the loading corral, placed a small water trough in there with her, and filled it with water.  Some green grass and the smaller round hay bale was in there for food.  Momma was interested in checking the loading corral out and I considered leaving her in there also.  But then she began to violently rub her head against the hay bale and started rocking it.  Before she could roll it off the wooden pallet I shooed Momma out of the corral.

Once I let the herd into the part of the corral with the large hay bale in the metal feeder the four cattle in the hayfield saw what was happened and wanted back into the corral.  I let them back in.  Easier than herding them into the corral.

The four cattle still in the hayfield

Momma waiting for the herd to join her. Still no baby calf.

Bull calf in the loading corral

When I had the gate open to the hayfield the cattle liked to scratch on the fence.


So much for cleaning the manure out of the corral.  It doesn't take long to get messy again.


Most of the herd

Beulah's daughter had a growth spurt within the past week.  Look how long her legs got.

What ya looking at?

Daisy, of course.  A favorite place for her to lay.


Wednesday, April 23, 2014

Pocket gophers and tree stump work

It's that time of year!  The pocket gophers are getting active.  Last week when dragging the harrow around the south pasture I noticed some fresh dirt mounds, which the harrow then flattened.  When I went back a few days later I found more fresh mounds.  I set five traps and have trapped four pocket gophers over two days.  I have a few more traps out on a few more dirt mounds, including two traps on my neighbor's land just across my fence.  Once these pocket gophers have been trapped I will be done for now.

I also finished filling in a tree stump hole from the last tree stump Tammy and I burned last year.

Filled in area.

I also started digging around another tree stump.  Of course it would be another "iceberg": just a small area of the tree stump above ground with a massive root underground.


Tuesday, April 22, 2014

Garden prep

I plan to have a small garden this year.   A few days ago I put down some plastic and boards to kill the grass to make rotor-tilling the ground easier and have less roots for grass to re-grow.


Daisy inspecting my work.

Saturday, April 19, 2014

Baby watch

This morning Momma looked closer to having a calf.   Judging from the swollen size of her udder's teats I thought she may have had a calf already who had been sucking on them.  Nope.  In addition to her udder's large size, her tail is sitting way up higher and her vaginal area is even more swollen.  She looks to be really close to giving birth.   ...but I thought that before so we'll see.

So I herded Momma into the corral as I don't want to have to search the hayfield for a newborn calf. The other year it took Baby a few days to be able to move around much when Momma gave birth last time.  Also, Momma would give "Grandpa Whiskers" company in the corral.  Still, when the herd is way out in the hayfield both Momma and Grandpa Whiskers look longing at them.


Lots and lots of licking her sides today.




Friday, April 18, 2014

Harrow and bull calf

Today I finally finished dragging the harrow around the pastures.  I only have the hayfield left to harrow and I won't do that until I re-lock the cattle in the corral.  Yesterday I spent six hours dragging the harrow over an uneven pasture and around and around many trees.  This morning I woke up a little sore from all the bouncing around I did in the pickup cab as I drove.


I don't think I mentioned it but a few weeks ago I discovered one of my little steer calves (Grandpa Whiskers) was not a steer but a little bull calf. He has a big pair of balls hanging down.  He usually has his tail down and being so short I never noticed his balls before. The guy I bought the calf from thinks he may have missed banding this calf.

So on the to-do list is banding Grandpa Whiskers and turning him into a steer.  Easier said than done.

Yesterday morning I noticed Grandpa Whiskers was keeping company with a little heifer.

Uh-oh!  

Both are way too young to be having sex.

I separated Grandpa Whiskers from the herd.  It went easier than expected to get him alone into part of the corral.  He has hay, water and salt and is set until I can get him banded.  He is an independent little guy but he does get a little lonely when the herd spends time at the far end of the hayfield.


m



A few weeks ago the biggest heifer went into heat for the first time.  She called for a boy for a few hours.  Thankfully only a couple hours - not ten hours like Baby called last year.  When the heifer first started calling she was near Momma and I initially thought Momma gave birth and it was a new calf calling.

Here is a 57 second video of the heifer calling once she laid down.  Her mother Beulah is in front of her.

https://www.youtube.com/watch?v=2WSF7tqz4ws&feature=youtu.be

Wednesday, April 16, 2014

Annual ditch burning

Today I finished my annual ditching burning.  On Sunday I burnt the ditch along the NE pasture .


The smoke in the background is my neighbor burning the hay their cattle did not eat over Winter.
 

As for the ditch along my hayfield, the wind was from the east / southeast and I was afraid the fire would get away and into the hayfield.  Earlier I had drug the harrow along the fence line a number of times but I saw that there was more dead grass than dirt or green grass.

The wind was like this for several days.   Then a few nights ago I was able to burn some of the ditch as the wind died.  But the wind died too fast.  With green grass growing among the dead grass, and a little higher humidity, I needed a small breeze to move the fire along.  I was able to burn a thin strip along the fence line.  Now if the wind would be from the east / southeast I could still burn.

Yesterday the wind was from the right direction: south / southwest.  But then it rained.

Today the wind was from the south / southwest and no rain.  So I was able to finish my ditch burning.  Even with the wind the cool temperature and higher humidity meant I had to nurse the fire along.

The cattle came to the fence as I was burning.  Several calves were curious and tried to either sniff or lick the flames.  They quickly learned that this was a bad idea.


The unburned section of the ditch is where the truck went off the road a few weeks ago spreading dirt and gravel.  


Tuesday, April 15, 2014

Harrow and flat tire

I started to drag the harrow around the pastures to break up the cow manure.  Not going well.  I finished the north and NE pastures and started on the middle pasture.  Sunday I discovered a flat tire on the pickup.

Flat

Monday I discovered the flat was not repairable due to the hole being in the sidewall.

The white circle shows the puncture.

I also learned that because my pickup has four-wheel drive all four tires need to be the same.  They need to be more than just the size of P245 75 R16.  I was also told they need to be the same brand and tire pattern to prevent drive train problems.

The ability of four-wheel drive and all-wheel drive vehicles to divide the engine's horsepower between its four tires is especially useful on loose or slippery surfaces such as sand and dirt, as well as on wet, icy or snow-covered roads. However it's important to remember that in order to transfer this extra power, the four-wheel drive and all-wheel drive vehicle's driveline mechanically connects the tires so they work in unison.

Four-wheel drive and all-wheel drive vehicles are equipped with additional differentials and/or viscous couplings that are designed to allow momentary differences in wheel speeds when the vehicle turns a corner or temporarily spins a tire. However, if the differentials or viscous couplings are forced to operate 100% of the time because of mismatched tires, they will experience excessive heat and unwarranted wear until they fail.

This necessitates that four-wheel drive and all-wheel drive vehicles use tires that are very closely matched. This is because different diameter tires roll a different number of times each mile as a result of the variations in their circumferences. Tire diameter variations can be caused by accidentally using different sized tires, tires with different tread designs, tires made by different manufacturers, different inflation pressures or even tires worn to different tread depths.

Okay...

The problem is that Goodyear discontinued their Wrangler ST tires.

I have only 19,000 miles on these tires and I didn't want to buy four new tires.  I drove around to some other tire stores to show them my tire.  No one had a similar tire and tread pattern.  I tried the used tire store.  Nope.  They didn't have one. I called a few salvage yards.  They didn't have a Goodyear Wrangler ST.  Then one tire store mentioned that they heard that a pawn shop supposedly had a lot of used tires.

And surprisingly they had lots of tires.  They no longer had a Wrangler ST but he had another tire in the same size.  I found that the salvage shops and used tires stores said one didn't have to match the tire brand exactly.  Especially since I seldom use four wheel drive and only on loose dirt or snow which already has some slip.

So I got another brand of tire in the same size.  I plan to use this tire as the spare tire and use the current full size spare as an active tire.  The same brand of tire and tread pattern even if this tire has no wear and the current tires are half worn.

It was suggested that it was more important to have exactly matching tires on the front when using four wheel drive.  I hadn't rotated the pickup's tires so now is the time.  Or I should say tomorrow as it started to rain after I got the tire.


I used my four old harrow sections and added the two newer sections I bought last year.  I placed a couple railroad ties on the front two sections to hold them down as I pull the harrow.



I also drug the harrow through part of the corral.



The north pasture is done.

Saturday, April 12, 2014

April Treasure Market

Tammy held another one of her Ultimate Treasure Markets today.  She has changed it from two days to one day and held it in half of the Trade Center building at the county fairgrounds.

Friday from 4 pm to 8 pm was the time most people came to set up their booth.  Tammy and I got there before 3 pm.  Between people coming in early and all the stuff we had to do we were still setting up when people started arriving.

Saturday morning the Treasure Market started at 10 am but Tammy and I were there by 8:30 am for the people who did not set up Friday night, or needed more time in the morning to put finishing touches on their booth.

Saturday morning started nice but a weather front arrived after 9 am with strong winds and snow when I was setting up the sandwich board signs along the roads and tieing helium balloons Tammy had purchased this morning.   Tieing a floating balloon can be tricky in good weather conditions.    Three balloons were torn free from their store attached ribbons before I started to tie the ribbons extra to the balloons.





I took this photo this morning before the Treasure Market was open and everyone was completely set up.


The Market was over at 5 pm.  By the time I took down all the signs and balloons, folded up all the tables and chairs, and cleaned the trash it was 8 pm.  A long day for both of us.  Even the balloons lost most of their pep.

Wednesday, April 09, 2014

More manure cleanup

I finished cleaning the manure from the south side of the corral.  The last of the manure was where I had fed the calves when they were being weaned from their mothers.  It was deep here.  And mixed in was the hay the cattle dropped as they ate.  It was hard to clean.



What you saw above on the ground was a full pickup load of manure. I have a couple low spots in the north pasture and that is where I dumped it.


Tuesday, April 08, 2014

Corral gate fix

I finished fixing the corral gate that the cattle broke.


Instead of just fixing the broken post, I used this opportunity to change gates.  The chain link gate was too flimsy for the corral.  I usually had to reinforce the gate when the livestock were in the corral to be on the safe side.  And I wanted a wider gate opening.


I have plans to rebuild the rest of the corral fence and replace the chain link gate.   I used this opportunity to add the gate I plan to use: a very heavy duty livestock gate.

This may not be where I will have the gate once the corral fence rebuild is done but it is was easier for now to place the gate here.  Since this is temporary I also used a temporary railroad tie because this tie already had the "hooks" the gate sits and swings on.  The downside of using this tie and "hooks" is that unlike the "hooks" that came with the gate, these "hooks" do not go above the gate hinge and I cannot put a pin in the "hook" to hold the gate on. So another temporary fix is the wire wrapped around the ""hook" and gate hinge to hold the gate on and prevent the livestock from lifting the gate off the "hooks".  It works.


I had ensured the railroad tie was straight up and down when I put it in the ground.  However I had stretched the chain link fence really tight and that may have pulled the tie off of level.  No biggie, the gate is temporary (which knowing all I have to do may mean it will be like this for two or three years).